Friday, February 12, 2010

Make your own pond vacuum cleaner

One of our readers made his own pond vacuum cleaner. He reports it works great and was cheap to make. He graciously shared how to make it with the readers of pondlady.com. I though it would be nice to post it here as well for readers who do not get to pondlady.com regularly.

Thanks for sharing, Darrel. We all appreciate it.

From Darrel:

Here's a list of the parts I used:
(1) Utilitech 0024840 Lawn Pump or Flint & Walling/Star Water
#HSPJ100(any 1hp utility pump with 1" intake/outlet)
(1) Culligan HD-950 Whole House Water Filter
(2) Union 1" slip X slip
(4) 1" male adapter, 1" slip socket by 1" NPT
(1) 1" 90º elbow slip
(1) 8 ft. of 1" spa flex hose
(1) 10 ft. of 1" PVC pipe
(1) 1" coupling
(1) Circular brush attachment from a vacuum cleaner to fit the PVC pipe.

Procedure:

The filter is attached to the inlet side of the pump.
(1) Screw a male adapter into the pump inlet.
(2) Cut about a 2-1/4" piece of PVC pipe.
(3) Glue this into the male adapter.
(4) Glue one side of one union to the pipe.
(5) Screw a male adapter into the filter outlet.
(6) Cut another 2-1/4" piece of PVC pipe.
(7) Glue the pipe into the adapter.
(8) Glue the other side of the union to the pipe.
(9) Screw another adapter into the filter inlet.
(10) Cut another 2-1/4" piece of PVC pipe.
(11) Glue the pipe into the adapter.
(12) Glue one side of the other union to the pipe.
(13) Glue the other side of the union to the spa flex hose.
(14) Glue the coupling to the hose.
(15) Cut a 6' length of PVC pipe.
(16) Glue the pipe into the other side of the coupling.
(17) Screw an adapter into the pump outlet.
(18) Cut a 2-1/4" piece of PVC pipe.
(19) Glue the pipe into the adapter.
(20) Glue the 90º elbow onto the other end of the pipe.
(21) Glue the remaining PVC pipe (approx. 2') to the elbow.

You want the filter on the intake side of the pump so you're not sending crud through the pump. There's also the possibility that if you suck up something living, you may be able to rescue it from the filter housing.

The pipe for the wand should not be more than about 6' or it bends too much and is difficult to control.

Lawn pumps need to be primed. They have a port for priming. You can also fill the pump/filter/pipe with water from a hose, or by scooping it from the pond. Just know that the pump, to begin with, will not suck the water up by itself.

You may notice that I used two additional male adapters, one on either side of the filter. This was only because the store had only one slip union. I had to buy one 1" slip union and one 1" NPT union. I then mixed the two halves of the unions so that each one became a 1" NPT X 1" slip union. The additional adapter then screwed into one side of each union.

When glueing the flex hose to the union hold it for a long time. The glue does not seem to set as fast as on the PVC pipe.

I've included a picture to help.

Darrel 

Monday, November 30, 2009

BIG fountains

I often get questions about huge fountains.  People try to put a fountain in a large pond, usually a natural bottom pond and find that the pump clogs up fast and the fountain stops working.

You will see fountains like the one in the photo at shopping centers and casinos.  This one is near a shopping mall near my house.  If you look closely, you can see that the fountain floats.  At no time can a huge fountain like this one be on the bottom of any pond or it will try to suck up debris and burn out quickly.

If you have a huge pond at home and want to use something like this, watch that the wind does not blow the water out and cause the level to drop to dangerous levels.  Sometimes you have to give in and install a float valve to keep the pond full of water.

Monday, November 16, 2009

Turtles in the pond





Nuf said? No?  OK, turtles eat everything in the pond. They start with your most expensive plants, like tropical water lilies and eat their way through every last plant.  And they do it fast.




You can have turtles in a pond if you have nothing else in the pond. You have to feed the turtles and make a little island and/or ramp so they can get in and out. Turtles do not live underwater.

In the winter, they burrow in the leaf mold and under the rocks and stay there undisturbed until spring when they wake up with a voracious appetite for more water lilies.









Turtle on a turtle?  Yup, it is.

To find more pond information, go to pondlady.com

And to meet a great community of gardeners, join us at  Gardeners  Gumbo

Sunday, November 15, 2009

Another kind of pondless waterfall








Most pondless waterfalls are holes in the ground filled with rocks or a box that makes the sound echo.  All nice and all with their own problems.  Yesterday I decided to make my own pondless waterfall in the front yard.

It could be a pond with fish and plants, but it is really small, so I now have my own mini pondless waterfall.

Here's how I did it:  I bought a 3' in diameter x 2' deep Rubbermaid horse watering trough at a feed and seed store.   It cost about 40 bucks.  I had a pump lying around from my active pond building days. It's a 700 gph Little Giant submersible.  I also had rocks in the yard, saved from my pre Katrina pond and moved to this house from the one that we had to bulldoze.

First was a hole in the ground. I did not bury the horse trough all the way, but left about 6" above the ground. It's easier to deal with that way, easier to keep level and doing it like that avoids any run off.  Also with our water table so high, digging a 2' deep hole would find me in the water before I got all the way down.

After you dig the hole, put in the horse trough and fill it with water.  If you don't it will rise like the phoenix while you are leveling it.  Add kiddie play sand around the edges to give a solid surface to hold the trough.  Use water to pack down the sand. As you doing that, get the trough as level as you can.  You will cantilever rocks over the top later, so you don't have to be perfect here.

Start piling up flat rocks to hide the sides of the trough that is above ground. Doing this will make the pond look natural.  Save a spot for the waterfall.

Attach flexible tubing to the pump and then T off with a hard plastic T fitting  like plumbers use.

Put the pump in the water.

Now build your waterfall on one edge of the trough.  Use a large flat rock for the bottom, put a few thicker rocks on top and add another rock on top of those.  That's about as high as you can get because you don't want water splashing out.

Place the two hoses on the top of the waterfall.  Maybe one hose on each level.  Whatever pleases you.  Put rocks the same thickness as the hoses on either side and a rock on top to keep them where you put them.

Now arrange the hoses so no water slides off the back or over the sides and out of the trough.

Hide the hoses in the back of the falls with rocks or plant material.

Use swimming pool chlorine to keep the water clear.

There, you have it and it only took a few hours.  This one took me about 5 hours yesterday.  I am moving a bit slow this morning.


To find more pond information, go to pondlady.com

And to meet a great community of gardeners, join us at  Gardeners  Gumbo

Thursday, November 12, 2009

Friday, November 06, 2009

Water Lilies in Winter

Hardy water lilies will survive the worst winter you can imagine.  I have seen hardy water lilies in Rocky Mountain National Park at about 11,000 feet.

 Remember water lilies are only pretty weeds, invasive and obnoxious if left to their own devices.  If you have planted them on the bottom in the bottom of a natural pond, you will regret doing that because they will cover your pond in short order. BUT they will survive. And survive. And survive.
You can tell the difference between hardy water lilies and tropical ones easily. The tropicals have stems that raise the flower far out of the water. The hardy lily flowers sit very close to the water, sometimes even touching it.

All water lily flowers live for about three days and then die. Another opens and so on, so you have flowers throughout the spring and summer.

If you have tropical water lilies, you must protect them in the winter.  If you have a deep pond, you can lower them to the bottom and keep your fingers crossed.  Here in South Louisiana, that's what I do.  Our freezes are relatively short and rare, so our lilies are safe.

If you live where your pond may freeze solid, you can remove your tropical from the pond, remove its leaves, rinse the corms off and pack it in damp sand.  Put it in the garage or somewhere that does freeze. You have about a 50/50 chance of saving your tropical. In the spring, simply pot them up again and place them in the pond.

 Of course, the ideal way is to have a green house and store the lily in it.  You can cobble together an 8' long box made of 1' x 12' lumber, line it with butyl rubber, fill it with dechlorinated water and your lilies will love you for it.  You will have blooms early in the spring.

No matter where you live in the US, your lilies are dormant by now. They react to the length of daylight and dark as well as temperature changes.  Don't worry, you will see them again in the spring.


To find more pond information, go to pondlady.com

And to meet a great community of gardeners, join us at  Gardeners  Gumbo

Monday, November 02, 2009

Ponds, men and women





Have you noticed? I know I have.

When men build ponds they want technical, complicated things like automatic water levelers. Women just use a garden hose to top off the pond every couple or months.

Men will run PVC pipes from the house hose bib and put a faucet near the pond. Women: See above.

Men plumb a waterfall with that same PVC pipe, so if it needs repair, you need a saw, sandpaper, more PVC pipe, fittings and that blue glue. Women use flexible tubing. If it breaks, they get a new piece for a couple of bucks.

Men hard wire a pump into an electrical box, so when the pump burns out, an electrician is needed to install a new one. Oh, and hard wiring the pump voids the warranty. Women just plug in the pump. When it burns out, they just plug in a new one.

Men love concrete. They use it to cement down rocks around the pond and try to glue waterfall rocks together. Women simply balance the rocks properly, so no concrete is necessary. That way, if rocks need to be moved, they can be picked up and  moved.

Anyone else find this strange?  Or is it just me?

Saturday, October 31, 2009

Pond Vacuum Cleaners Redux


I get questions about pond vacs all the time. People want to use a pond vac or a wet vac to clean the bottom of the pond and not have to do a total clean out.  And will that work?  In a word, no.

A pond vac sucks up water.  It sucks up the junk at the bottom of the pond, but it sucks more water than junk.

The other big problem with pond vacs is that they do not have enough suction to reach from the top of the pond where they must sit to the bottom of the pond where the junk is.  Wet vacs are better at this, but still not the best.

 If you want to clean the bottom of the pond and not pump all the water out of the pond first, try this: Go to the swimming pool supply store.  Find a gadget that looks like the picture in the link above.  Do not buy the mesh bag that the salesman wants to sell you. It doesn't work because the mesh is not fine enough.  Also, if you don't already have a telescoping pole for your fish net, buy one of those as well.
When you get the saucer/vacuum cleaner home, attach your garden hose to the fitting on the saucer and a leg from an old pair of panty hose over the hole in the middle of the blue saucer.  You now have a water pressure powered pond vac that will (sorta) clean the pond bottom. At least it will do a better job than the ones you pay lots of big green dollars for.

Put the saucer on the bottom of the pond.  Turn on the water.  If you turn the water on first, you will start the job wet.

Using the pole, which also has a handy place to attach, start vacuuming the bottom of the pond.  The panty hose will fill up fast with all that pond scum on the bottom.  You will quickly have a panty hose leg full of decayed plant material, fish waste and other unspeakable stuff that drops to the bottom of the pond.

When the panty hose leg gets heavy, turn off the water and empty the panty hose leg.  Repeat until the bottom of the pond is as clean as you want it.

By the way, I put a water shut off valve at the saucer end of the hose so I can turn off the water without having to walk back to the hose bib every time.

This is a dirty, messy job.  Wear old clothes and be prepared to shower immediately after.

Friday, October 30, 2009

Pond still losing water




You are pulling your hair out trying to figure out why your pond is still losing water.  Do you have a fountain in the pond?  If so, make sure the fountain is not too close to the edge and water is splashing out.  Check your waterfall as well. If water is splashing on the rocks near the edge of the waterfall, it is splashing out.  Falling water must have an area twice as wide as the water is high for the water to stay contained. So if your waterfall or fountain is pumping water 2 feet above the pond, the pond must have 4' of surface for it to fall into.  
One more thing:  If you have a fountain with some sort of nozzle or a spitter that sends water far in the air, the wind can blow the water out of the pond.  Watch your pond water level when the wind is blowing. You might want to turn off your pump if it's windy.


The holes in a nozzle can get clogged up and pretty soon you have one thin stream of water shooting out. It is hard to see because it is so thin.  Check it. You may wish to remove the nozzle completely.   Or clean it lots and lots. With a toothpick. And a brush. In the water. With your boots on.  Frustrating.



Thursday, October 29, 2009

Help, My Pond is Still Leaking

You have checked everything. There are no liner holes, the waterfall water is falling in the pond and not sneaking off the back, all hoses and hose connections are tight and secure, but your pond is still losing water.

Do you have a spitter? A spitter is some ornament, often a statue of a frog or bird that has a hole in the bottom and spits water out of its mouth.  I am not a big fan of spitters, but you are and you have one.  First disconnect it. If the pond water level stays put, you know that your spitter is the cause.  Often as pumps get clogged up or hoses get full of algae, the water flow slows down and the spitter drools. When that happens the water sneaks out of the pond, sometimes only a drop or two at a time.  If you don't think that is very much, let water drip slowly out of your inside faucet and see how much your water bill goes up.

To repair a spitter drool, you can move the spitter so it sits totally inside the pond or prop it up next to the pond with a serious tilt into the pond so water can't escape.  Watch out for this method because the thing can fall into your pond and puncture the liner. Then you have bigger problems.  My solution. Disconnect the spitter and let it sit wherever you wish minus the water coming out.

Tuesday, October 27, 2009

How to Patch a Liner


I always recommend using a 40 mil butyl rubber liner when you build a pond.  Unless you walk on them with golf cleats, they survive most anything.  But occasionally, they get a leak.  If your lab loves to play in your pond, those toenails could cause a leak.  One time I had to deal with a client who put sharp rocks in the pond and put plants on top of them.  If you must put huge, sharp rocks in the pond, put an extra piece of liner underneath and don't move the plants around by just sliding them. Pick up the plants and the rocks if you must move them.
The hardest thing to do if you have a hole in your liner is finding it.  See http://www.pondlady.com/Articles/pondleaking.html for hints on finding the leak.
After you find it, be sure the liner surrounding the hole is clean and dry.  If you are not in blinding hot sun, you may need a hair dryer to get it totally dry.
The 40 mil butyl rubber liner is the same material as an inner tube, for those of us old enough to remember those.  You can use a tire patch found at any automotive store or you can buy patching material from an aquatic nursery or online from any pond supply store. It doesn't' cost much. You simply cover the hole with the patching tape - it's sticky on one side. And you are done.  I have had patches last for over 10 years so far.
So find the hole, slap on the tape, make sure it's dry,  refill the pond with water and  you are good to go!


Sunday, October 25, 2009

Catching Goldfish

I have had a few questions about ponds freezing solid.  What to do with the goldfish?

You have to catch them and bring them inside.  I have heard that goldfish can freeze and survive, but have never seen it happen, so bringing them in is best.  But first, how to catch them?

Try this:

1)Fill a container with pond water.

2)Get a bucket of very warm, even hot, water.

3)Pour it slowly into the pond. The fish will come toward the warm water.

4)Use a net, catch the fish and put them in the container full of pond water.  Water is heavy so don't make the fish container too big or you won't be able to carry it.

5)Let the fish warm slowly in that same pond water before you transfer them to their winter home.

By the way, if the pond does ice over, do NOT  hit it with a hammer to open a hole.  The blow could kill the fish. One way to open a hole is to put a pan of hot water on top of the ice and let it melt.

Saturday, October 24, 2009

Leaky liners

I know we have talked about liner leaks before, but the question keeps getting asked: How do I fix my leaking pond?

First of all, your pond is probably not leaking. I always tell people that when they call to tell me their pond is leaking.

"Hi Jan, my pond is leaking."

"No, it probably isn't."

"But it is losing water every day and anyway how can you know that if you haven't seen it?"

"I have seen thousands of ponds and am all knowing.  Chances are about 99% your liner has no hole in it. Let's troubleshoot.  If I have to come over there, you will need to get out your checkbook, so if we can do this over the phone, my advice is free.  Which do you prefer?"

"Over the phone."

"OK, turn off your pump, fill up your pond and let it sit over night.  If the water stays put, your water is falling behind the waterfall.  If you have a spitter, the water is drooling down the spitter and out of the pond. Check your waterfall rocks. Chances are one of them has tipped and water is not going back in the pond, but falling off the back.  Look at the water level in the morning and call me back."

I usually get no call back.  The pond owner has learned something.  Liners rarely leak. They rarely get holes in them unless raccoons have been marauding through the water in search of tasty morsels.

The pond owner finds the wayward rock, tips it back into place and all is well.


Thursday, October 15, 2009

Concrete Pond Leaks

I get questions all the time about leaky ponds. Since there are so many kinds of ponds, so many kinds of leaks and so many ways to repair them, I want to spend  a few days talking about leaks.

Let's start with concrete ponds. I do not recommend building ponds with concrete because it is not watertight and is brittle, but many people use concrete, so I get to fix their leaks.

Concrete ponds crack.  It's inevitable. If you have a concrete pond, it will crack.  Plan on it.  I don't care if you use concrete 6 inches thick and 6000 psi. It's gonna crack.  So, now what?

If the crack is hairline, you perhaps can fix it. Maybe. For a short while anyway.  Get some plumbers' epoxy.  Not plumbers' putty. Epoxy.  Make the crack bigger. Dig it out so there is a bit of a V shape, like the dentist does when he fills a cavity in your tooth.  Now make sure the crack is dry and clean.  If you have to, use a hair dryer to dry it completely.

Now mix the epoxy. Put gloves on first because the epoxy sticks on your hands just like it sticks on the concrete. Epoxy comes in a tube and looks like a big stick of chalk.  So unwrap as much as you need and start pinching and rolling it - gloves on, remember.  In a couple of  minutes, the epoxy will get warm. A minute or so after that, it's ready to use.  Smush the epoxy in the crack. Notice the technical term, smush. It's important. Make sure the epoxy is pushed into the crack and smoothed out both in the crack and along the edges.  Wait for it to dry.  The directions on the side of the package will tell you how long that will take.

When the epoxy is dry, refill the pond with water.  The epoxy will not hurt your fish or plants.

I have had some repairs last for several years, some for only several months.  I never guarantee a concrete repair.  Often I will do it free if the pond belongs to a steady customer.  If the customer pays for the service, he expects some sort of warranty and this repair is not good enough for that.

If you can see through the crack in your concrete, you cannot repair it. I don't care who says you can, it is not possible. Find a waterproofing company and have them put a new coating on your pond.  Or just drop a butyl rubber liner inside the concrete pond and start over.

Monday, October 12, 2009

Ponds and the Frost Line

Because I live in the Deep South, I do not have to bother about a frost line because aside from some chilly weather occasionally, we don't have to deal with frozen ponds.  But those of you who do, need to know what the frost line is in your area. You can find out by calling your local extension office if you don't already know.  Oh, the frost line is the depth of soil where it no longer freezes.  For some of you, that is really deep.  When you are building your pond, know your frost line and dig the pond deeper than that.  That way, your pond will never freeze solid.  Your fish have a chance of survival even if the top of the pond freezes over.  I do advocate keeping a hole in the ice, but sometimes that is not possible.  Fish are in torpor, a form of fish hibernation all winter, so they just lie around at the bottom of the water in suspended animation, if you will.

Digging below the frost line will mean less chance of damage to your liner as well.  You have, of course, removed all your pond equipment already and stored them safely. Right?

Check http://www.pondlady.com/Articles/winter_pondcare_2.html  for more winter pond care tips.

Sunday, October 11, 2009

Did I mention pond plants?


Cut back your tropical pond plants now.  If you plan to overwinter them, bring them in the garage or the greenhouse.  Most of them will do fine if not frozen solid. If you have anacharis and your pond will freeze solid, bring it in too and put it in a washtub in the garage. (Garage getting crowded?)  Put your goldfish in there too if your pond is not below your frost line

Cut back your hardy plants as well. I cut mine back to about 3". The pond will look dreadful all winter, but the plants will come back green and healthy next spring when the plants put out new growth.

To make the fall pond into something besides a gray hole full of water, add some mums around the edge for fall color.  Put a few painted cinder blocks in the pond to raise decorations out of the water and put some Halloween decorations on top.  Or a few more pots of mums.


Tuesday, October 06, 2009

Winter is coming





From questions I have been getting, it seems as if some spots in the country are headed into winter. We, of course, are still in the last throes of summer waiting for the 90 degree heat to finally give up and go away. So for those of you in cooler climes, here's a great article on how to deal with your pond equipment during the winter.  Remember if your pond depth is below the freeze line, you do not have to remove your fish. You just need to keep a hole open in the ice.

Winter Care for Pond Equipment









T

Saturday, October 03, 2009

Pond Fish in Winter

As the nights lengthen and cool, you may notice your fish becoming less active and lying around near the bottom of your pond.  If you do feed your fish, stop now.  


You can kill them if you feed when the temperatures are below 55º F.  


Even if you have a day or so above that temperature, do not feed. For tips on winter fish and plant care, read this article I wrote about fish and plant care during the winter: Winter Fish Care

Wednesday, September 30, 2009

Fish are cannibals


I get questions at my pondlady.com website and occasionally share them here.  Here's one that you may not know or have forgotten:


Question:

I have goldfish.

So, do the alive fish eat their dead? I've actually never seen a fish eaten like this is my pond. Sure, I have found plenty over the years, in all seasons, die and float to the surface, but never eaten like this.

I will take your advice and resist the temptation to feed them even in this warm spell.

Answer:

Yes, all fish will eat other fish. In fact, fish will kill a sick or weak fish. I think it is a way they have of keeping the school hardy.

Your goldfish will be just fine if you never ever, feed them, even in the summer. Just balance the pond ecologically with submerged vegetation and make sure your bioload is not too high and you can just relax and never have to clean fish poop out of your pond except in your yearly cleaning.





Saturday, September 26, 2009

More about irises


I forgot to mention yesterday that it's time to cut back irises.  Many people do it in the early summer right after the plants bloom, but I like to enjoy the foliage all summer, so I wait until fall to cut them back.  Remember the iris blooms on new growth, so divide and cut back. That way all growth next spring will be new and you will irises to share and irises to enjoy.


Wednesday, September 23, 2009

Pond liner problems

I have a website at pondlady.com
People ask and answer pond questions there. Occasionally I get an common question and share it here. Here's one about liner suddenly rising from its floor:

Questions:

We have an in ground, 8' fish pond that was built 4 years ago. We buried an 8' stock tank and laid the pond liner over that and put about a billion rocks around it. This year, water has started getting between the stock tank and pond liner and rising the liner up out of the pond. A recent 5 " rain really has brought the issue to a crisis point. I see no obvious leak in the liner and we really don't want to move all those rocks to lay in a new liner...what should we do? We have pumped it out a couple times, but water keeps getting between the liner and stock tank.

Answer:
You have methane between the tank and the liner. No amount of rocks will keep it from rising. Try to make a place where you can pump out the water that has gotten between the two. That will help until it happens again. The only way to stop it from happening is to raise the entire pond, tank and all. (Shudder.) Or you could build up the sides, make the pond bigger and use the weight of the water to keep the liner in place, but if you do that, you might as well just start over with just a liner and no stock tank. You have a big job ahead of you.

To get more pond information, head over to pondlady.com

Friday, June 05, 2009

From my inbox

Dear Jan,
I don't know if you remember me but I wrote to you last fall and we talked about Gregg Wittstock and Aquascape and their CAC's. I have now been fighting them for 10 months to get the pea gravel out of this man-made waterfall and stream because I found pea gravel clear up in the biofalls and my pump failed because it was pumping gravel instead of the water. To make a long story a bit shorter, they have finally decided to finally get the gravel out of the basin and put in AquaBlox. They will do this for free. But do you know anything about these glorified milk cases? They are only warranted for 1 year. After that who knows, another fight. Do you feel this is needed? They are supposed to give the basin more water volume. ????

Also, I have two plants in the water of my pondless......my contractor put them in. The second season of running our pondless, we noticed tons and I mean TONS of string algae. I have used the NON-guaranteed algaecides, barley straw, bleach, chlorine tabs and nothing has worked. Should I take OUT the two Sweet Flags I have in the water? Are they causing the algae to form? Any information would be greatly appreciated. OR is there something the contractor did that would lend to this production of algae? Like, not making the biofalls level or something like that. I was told to put in bleach, but how much and how often? My pondless is 4' by 12'.

Without bad luck, I would have no luck at all..............after spending over 20 hours getting the pea gravel out of the basin and stream........I would say we were able to get at least 90 percent of this stuff out........now Dreamscapes call and say they will take out all the pea gravel.........I am sure my husband and I got more out than they would have, so although it was really hard work, I now know what is in and around the centipede......and it is not pea gravel!! My husband is 68 years old and he must really love me to do all that work because he knew how I was fretting over it. I just didn't want to put in a new pump and have it ruined by all the pea gravel. Also, could you tell me again what pumps you would choose to put in the skimmer that have good guarantees? You told me before but I must have misplaced your information. Thanks.

If I could just get rid of the string algae..........I did put barley straw in the biofalls in March a couple of years ago. We live in PA. It worked for a while but then seemed not to do anything except muck up the stream bed.

I wish there was a way to really blog about Aquascape Design, Inc.-- I really can't stand them or their products. They are crooks in my book.

Thanks for letting me vent again. Hope to hear from you soon.

Pondlady sez:

Try Microbe-Lift for your string algae.
I don't know a thing about Aquabox.
Ya know, you could remove the irises, plant them next to the pond and use swimming pool chlorine and your pond water would stay crystal clear. The irises are not causing the algae, nor did the contractor. Sun + water = algae. Use more chlorine than you have before and you should be fine.

As far as pumps go, I like Oase brand pumps.

Monday, April 13, 2009

Filter question



The first canna of 2009 starts to open in my bog garden.


I get email with pond questions. I got this one a few days ago and thought I would share it with you.

Question: I would like to put a 25" round by 15" deep tub. If I put in a bunch of grass, 1 drawf lily, 2 regular goldfish with a pump hooked up to a spitter will I have a successful little pond? Do I need a filter? What size pump would I need. The spitter will be place on some flat rocks at the edge of the pond. I don't plan on feeding the fish but will feed the lily.

Pondlady sez: Yes, you will be successful and need no filter. Don't feed the fish and put a couple of bunches of grass in the water. Feed the lily one tab a month. Use a pump that will pump about 140 gph depending how high the spitter will be. The spitter cannot exceed 12" in height or the water will splash out.

Monday, April 06, 2009

Koi and Goldfish eat their babies

Question I received lately: I have Koi and Goldfish. I feed them daily. Why don't I have babies?



Pondladay sez: Chances are the fish are eating their babies. They are not good parents.
You must feed koi. Goldfish can exist and live well eating off the plants in the pond....unless you have koi who will eat them all.

The more you feed them, the bigger they get and the hungrier they get. Sooner or later your bio-load will be too heavy and your biggest fish will die, but in the meantime, your fish will eat every baby they catch.

Thursday, March 19, 2009

Tea Colored Water

Often we try dozens of filters to try to get tea colored water clear and nothing works. The water is turned that color by leaves usually from oak trees, but other leaves/pollen do the same thing. Here's how to fix it: Use activated charcoal. Do NOT use charcoal briquets like you use for barbecuing! Go to the aquarium store and get a box of activated charcoal. Often it comes in a box that looks like a half gallon milk carton. Put the charcoal a cut off panty hose leg and put the resulting tube in your filter. The charcoal 'washes' the water and you will have clear water soon. It is a bit expensive, but worth it.

Tuesday, March 17, 2009

Irises mean spring





Louisiana irises are starting to bloom. This one is in my front garden today and more bloom stalks are evident and about to burst. Callas in the pond are blooming. Spring, maybe not officially, has arrived. Get ready to see your fish become active and your pond plants begin to bloom. It was a long winter, wasn't it?

Monday, December 22, 2008

Fish Feeding in Winter

Question:
I was wondering what one should do with the fluctuating temperatures in coastal NC right now....last week or so the pond water was below 50 and I did not feed the fish. Now, the temp is back up to 56 and I found a partially eaten fish at the bottom of the pond when I cleaned out some debris. Are my fish starving to death and resorting to cannibalism? Should I feed them for a few days, and then stop when the temps. start to drop again??


Answer:
Your fish are not starving to death. Your half eaten one was probably eaten by one of your famous NC flying predators like an egret, heron, or maybe even a walking and furry one like a raccoon. Do not feed them. They are still hibernating and will not be able to eat until the temps are above 55 for a long time.

Question, continued
The pond is covered completely with chicken wire. No predators can get in now (although the reason it was covered like Fort Knox is because of a heron, who I caught in the act, and a raccoon, who polished off my biggest fish, and left some droppings. We had it covered with a net, but the heron broke through the net, punching in a big enough hole to gobble up some fish. The raccoon came a few days later and took advantage of the hole, which we did not realize was there.)

So, the fish left are VERY active right now, not listless at all, hanging around the top of the pond right now with our warm weather. They are quite still and deep when the water is really cold. I did feed them today.

So, what do you think about the dead fish now? My guess is a heron or raccoon would not leave anything behind. This fish (about 4 inches long) had its middle eaten away....

And what do you think about the hibernation theory, given the activity of the fish? It's a very confusing weather pattern we have right now, with the temps in the low 70s, and not getting too far below 55 at night. Next week, who knows?

Answer, continued
I understand your wish to feed your fish, but please don't. It could be that the dead fish was sick from getting something to eat and not being able to digest it, so he died. Feeding fish in the winter can kill them quickly. If you want to double check, go to koivet.com and have a look. You will find that fish cannot survive being fed in cool weather. Do you have goldfish or koi? Neither needs feeding in the winter, but koi need to be fed in the summer.

Question, continued
I have goldfish.

So, do the alive fish eat their dead? I've actually never seen a fish eaten like this is my pond. Sure, I have found plenty over the years, in all seasons, die and float to the surface, but never eaten like this.


Answer, continued
Yes, all fish will eat other fish. In fact, fish will kill a sick or weak fish. I think it is a way they have of keeping the school hardy.
Your goldfish will be just fine if you never ever, feed them, even in the summer. Just balance the pond ecologically with submerged vegetation and make sure your bioload is not too high and you can just relax and never have to clean fish poop out of your pond except in your yearly cleaning.

Ten Laws of Pondkeeping

This should give you a few ideas about keeping your pond balanced so your fishies stay healthy. Sounds like you are doing a good job.

Tuesday, November 25, 2008

Edible pond plants





In case you are ever stranded while camping or otherwise in need of survival food, the pods of yellow hardy pond lilies and pickerel rush are edible. You can bake or boil them like potatoes. They certainly are not gourmet food, but would probably taste pretty good if you were hungry enough.


Sunday, November 23, 2008

Your UV Light in Winter

If you live where the temps drop below 40 degrees F in the winter and use a UV light, you can remove it until the weather warms again. Algae die off in the winter plus you can save electricity if your UV is not running. Be careful, those bulbs are fragile. And expensive.

Friday, November 14, 2008

Epoxy Pond Liners

Epoxy pond liners were around when I started building ponds back in 1987. There was not a market for the epoxy for the small residential contractor or do-it-yourselfer yet because there was not much of a pond market yet. The epoxies made then were for large commercial applications where waterproofing was necessary and huge machines were available for mixing and spreading. We tried to mix it using a paint stirrer on the end of a drill, but the results were disastrous and getting the epoxy off whatever it got on was almost impossible.

In recent years epoxy pond liner makers have made great strides in research, development and application. Building a pond using epoxy can be done by the small contractor or the homeowner. It is easily mixed and applied. But do be careful. Getting on your hands or clothes means living with it the rest of your natural life.

One of the most wonderful uses for the new epoxies is for patching concrete ponds. I have told my concrete pond owners when they called with a cracked leaking pond that there was nothing that could be done. I would put some plumbers' epoxy in the crack and tell them just to keep on doing that every time the pond cracked again. And concrete cracks in tropical climates where most of the land is below sea level. Now a crack can be patched just like patching dry wall. Use some cloth made just for epoxy use, insert it in and over the concrete crack and then float the epoxy over it. Most installers proceed to coat the entire concrete pond because it looks better and will stop further and inevitable cracks.

PVC liners came first in the pond building business. They were all we had, so we loved them. Their biggest drawback was not standing up to sunlight. PVC liners cracked like visqueen and needed replacement if the pond wasn't built so water covered every bit of the PVC liner.

Rubber liners were next and will undoubtedly rule the industry for years to come. If you want to know what a rubber liner is, just think about a huge piece of inner tube material. That's a rubber liner. Firestone makes them. I am sure many other companies do as well. A 45 mil thick liner comes with a 40 year warranty. They run about $1.00 a square foot, although you can get them online for cheaper. The biggest drawback of online buying is paying the shipping, but often you can still save money. The next biggest drawback with rubber liners is weight. If you buy a 45 mil rubber liner 20' x 20', you better have a couple of strong guys to put it in place for you. I still love rubber liners and after they were widely available, have used them exclusively. Rubber liners withstood anything Katrina threw at them. My customers and I were happy to see them whole after seeing everything else destroyed.

I think epoxy is coming into its own. It may well be that it will be the liner of choice one day. As far as I am concerned, the ability to patch a concrete pond is reason enough to love it.

Isn't it great that we have another liner choice now. We can apply epoxy to the sides of a hole and have a waterproof hole. Now that's nice.

Saturday, November 08, 2008

How to Build a Koi Pond

Koi and goldfish? There's a difference?

Koi? What are koi and why must I build a koi pond differently than any other pond? Can't I just put koi in my pond? One would think so, but one would be wrong.

First of all, a koi is a carp, just like a goldfish, but it is from a different family. Goldfish are descendants of crucian carp and koi are from common carp. Koi usually have two whiskers like a catfish and goldfish don't, so they are easy to spot if someone wants to give you one.

And there are other differences as well. Goldfish dart around more in the water and will eat your submerged vegetation as they fertilize it. Your pond will be a relatively maintenance free ecosystem with plants and goldfish. Koi, on the other hand, swim lazily around eating everything they can get their mouths around. They love your most expensive water lilies and will dispatch with them first. They work their way through every piece of vegetation you have in your pond and look for more before you even realize you must feed them.

So a koi pond is a special outdoor aquarium made just for koi. Koi will pull plants down from outside the pond just for sport. They also have a awful habit of jumping out of the pond where you find them stiff and dry when you come home from work. The jumping out is often a sign of foul water. A goldfish pond is a water garden with goldfish swimming around behaving themselves.

Before you even think of building any pond, think long and hard: Do you want a koi pond or do you want a water feature with plants and goldfish? For goldfish pond building see How to Build a Pond

You have decided you want a koi pond because you want koi as pets.
A koi pond must be deeper than a goldfish pond. Koi need more room to move around. They like to swim up and down as well as back and forth. They also grow and grow fast, so make your pond at least 3' deep, deeper if you can and as big as you can afford. Try to get your koi pond dug below the frost line or you will be trying to figure out how to over winter them in the house when it freezes outside.

A koi pond should be built up above the ground. I like to do this with goldfish ponds as well to keep run off out and therefore avoid chemicals that may run into your pond. If you can get your koi pond edges up at least 6", you will be safer and possible keep your koi in the water instead of lying on the ground. I have known professional koi keepers who build their ponds at least 18" above ground, usually using concrete for the entire pond rather than a butyl rubber or EPDM liner.

Koi ponds must have filtration. As much filtration as you can afford. Do you get the idea that koi keeping can be expensive? In the past koi keepers used swimming pool filters. Now bead filters are popular. If the bead filters are just too expensive, a quality biofilter will do. It should be big enough for your pond. Most biofilter manufacturers will help you pick out the one that will work best for your pond size.

Using a UV light sterilizer, usually called a water clarifier is necessary for your koi pond. It will kill algae microorganisms and keep the water clear so you can see your fish.

Koi are hungry fishies. You must feed them. You will find scores of koi foods available. I make no recommendations about which one to buy. I suggest finding a koi club in your area and see which ones their fish like and following their examples and suggestions. One thing I know koi love to do is play with a half of a red cabbage. Don't shred it. Let them play with it like a basketball.

The water chemistry must be perfect. Any radical changes in pH, nitrate, nitrite, ammonia must be corrected immediately or your fish will get sick.
The biggest difference

Don't forget one basic difference. When you build a koi pond, you are building a special house for your pets. When you build a goldfish pond, you are putting a water garden in your landscape.

And you will name those koi, I know that. Because you named your children and your other pets. Koi can get sick and die of the strangest diseases before you are even aware they are sick. I suggest not naming them.

Wednesday, October 29, 2008

Decorate Your Pond for the Holidays



Our holiday season is upon us, ready or not. Some folks just barely get through the season and others think it the best time of all the year and start looking forward to next year when this one is over. If you decorate your house, you probably decorate your yard. If you decorate your yard, don't forget your pond. You can make it a showpiece in the winter as well as the summer with a few simple ideas. So let's make your pond a focal point during the holidays just as it is the rest of the year.

There it is, in the middle of your garden, just sitting there, silent, icy, gray and completely unattractive. It doesn't have to be that way. You can decorate it for the holidays. Any holiday. For the American Thanksgiving, you can put a painted black cinder block or two or more in the water and put most anything you wish on top of it. Don't forget to spray the cinderblock black with spray paint so lime cannot leach out and the block becomes invisible in the water. A pot of red or yellow mums would look wonderful sitting on top of the cinder blocks for Thanksgiving. You can put a rosemary Christmas tree on that same cinder block just a couple of weeks later, decorate it with a few red bows and it would look great throughout the season.

A rosemary Christmas tree is only a rosemary plant clipped into the shape of a Christmas tree. You can usually find them at your local nursery or big box store right now for not much money. Next spring you can plant it in the ground and if you wish, keep it trimmed up for use again next year. Or if you wish, put a poinsettia plant on top and some more around the pond edge. You can also put these in the ground in the spring and they will grow large and bloom again next year. They do need complete darkness at night, though, so keep them away from street lights.

How about an angel or cherub statue on the cinderblock? Use your imagination for other rosemary tree decorations. How about some small Christmas tree balls, or tiny angels. Maybe it could be a project for your children as long as they are old enough to be around the water unsupervised. We would not want anyone taking a cold bath in November or December.

Perhaps rope lights strike your fancy. You can use rope lights around your pond. Simply weave them in and out of the plantings or bushes. They are cheap and can be found even at drug stores these days.

If you have a formal pond or no planting around the pond, string a rope light around the base of the pond or in the statue that sits inside it. Put a garland around your statue or dress it as a Santa.

Light up your pond in the winter. You may have a light already in your pond. Light it now. It will give the pond a glow that can be seen from your house and the street giving you and your neighbors a smile when you see it.

Put lights around your pond. If you have solar powered lights, they might not work as well when the sun is low in the winter sky. It might be time for low voltage lights that you can use now and all year round.

There are floating lights, even solar powered ones to add to your pond for even more interest.

Float some faux plants in the water, like hyacinths or even water lilies. Real plants are long gone until spring, but you can still have some that are amazingly realistic.

Glass balls that float are available and look divine both in summer and for the holidays. If you can't find these, just ball up some cellophane and float that around. No one will know what it is from a distance. These have a tendency to come undone, so you might want to fasten them in the center with a string or small tie.

With a bit of imagination and some bits and pieces of ordinary things, you can have a great look and lots of fun making your pond a part of your holiday decorations.

Tuesday, October 21, 2008

Ponds across the Curriculum



Over the years, I have been involved with several schools with ponds and several schools wanting the students to build a pond. Usually in schools with younger children, the parents and older siblings do the building and initial set up. After that the younger ones can easily take over any maintenance duties. If the pond is balanced ecologically, maintenance is easy and takes only a few minutes every month. Make sure the pump is unplugged and the plug does not get wet and everyone can help with the clean up. Pinch dead plant leaves and flowers off. Clean the inlet part of the pump, net any debris off the bottom and you are good to go. When you are finished, plug in the pump again and your waterfall starts and everyone is pleased.

The pond offers not only entertainment and enjoyment, but countless teaching opportunies. Pond building can involve every class, every discipline, no matter the age or grade of the students. All children know or need to know what a plant is, that it has roots, that it needs water and sun to grow. Each child needs to know that plants and fish can and do live in water, grow and thrive. And if the ecosystem get out of balance, plants and fish can die.

DO NOT NAME YOUR FISH!

Teaching suggestions:

Arithmetic/math
How big does the pond have to be?
How much liner do we need?
How big does the pump have to be?
How much do the rocks weigh?
How do we stack the rocks so they stay in place?
How do we find out how much water is in there?
How many square feet of water surface do we have?
Reading:

Well, directions, of course. Or pond building books or websites that spotlight pond building. This also sharpens computer skills and search engine skills. Reading pond books or printed web sites can give differing outlooks on pond building in different climates, fish and plant care in tropical versus temperate climates. Reading and research skills can be sharpened by needing to know how plants and people interact, especially how people cannot exist without plants.

Geography:

Rainforests are being destroyed. Where are they and why do we need them?

Writing:
How does the pond make me feel?
What does it look like?
What lives in there?
Why do we need plants and fish?
Why I love our pond.
Write a haiku about ponds.
Science:
How much water do we have?
How much water is the pump pumping?
What is an ecosystem?
Can I feed the fish?
Why can't I feed the fish poptarts or my peanut butter sandwich?
Why is the pond green?
How can I get my turtle out?
Why do we have to add a dechlorinator?
Behavior/life skills

Learning that building a pond takes team work. How to read a tape measure. What tools are needed and how are they used and why? Why do we need to use the materials that are necessary? Why can't the liner have a hole in it? Safety with tools and building materials.

I have found that children get completely engrossed in the pond, especially if they assisted in the building. If parents are involved, it is even better because the building process gets the parents involved in the child's school activities. And, best of all, when summer comes no one has to take the pond home to care for it.

Thursday, October 09, 2008

Winter Pond Equipment Care

Pumps, filters and UV lights

When temperatures drop, winter pond care is necessary. Algae growth stop, so you can disconnect your filter and UV light if you have one. Remember you only need filters and UV lights if you feed fish. If you make them work for their room and board by eating submerged vegetation and in turn fertilizing it, you have no need for filtration or UV lights.

As the temperatures drop to 39 degrees F, turn off all pumps and fountains. Fish like to stay in the bottom of the pond where the water is warmer, so don't stir up the water and lose the bottom layer of warmer water.

Remove your pumps now, check the hoses for leaks. Clean your pump, clean and wipe down your filters and UV lights. To clean tubes and remove lime scale, you can wipe them with vinegar.

De icing

When the pond freezes over, you must create an ice free opening in the ice, so gases can be exchanged and the fish can breathe. You can buy deicers, but if you do, buy the ones that are used to keep horse trough water from freezing. They cost about 1/4th as much and work better. And cost much less to run. Another way to keep a hole open is with a plastic jug that milk or water came in. Put a couple of cups of water in the jug, tie a string on it and float it in the water, tying the string to something you can reach easily. If the pond stays iced over in the morning, pull the jug out and you will have a hole in the ice. If the temperatures stay below freezing all day and you expect them to stay there, you must use several jugs or a different method altogether. You must be vigilant if the temperatures continue below freezing because ammonia and carbon dioxide build up from fish breathing. Ammonia is also generated from decomposing plant material and fish waste. If these gases can't escape, your fish can die, plus they need oxygen to breathe.

If your pond does freeze over completely for more than a day, do NOT whack it with a hammer to open it. The shock can kill your fish. Use warm, not hot, water from your inside faucet to open a hole. Just run it over the ice or put it in a pot or bucket and put it on the ice. You can also run water from your garden hose and the ice will melt, unless you live where the hose is frozen too. I have heard of people putting a piece of black visqueen on the ice to thaw it, but have never tried it. Let me know if it works. You can do these things daily, but I think the plastic jug is easier. And, of course, the deicer is easiest, but also costs a few dollars.

Some people build a frame over their pond, like a cold frame, out of PVC and visqueen to keep the pond warmer and protect it from debris falling in the winter. This can be a good idea because we tend not to pay as much attention to the pond in winter and a small problem can become a disaster if not prevented.

Do not run a pump that brings the warmer water up from the bottom of the pond to the top. Pretty soon all the water will be cold. If you do put a pump in the water, raise it to only 10 or so inches from the top. That will leave the warm water at the bottom where the fish are more comfortable.

Fish food, liquid bacteria, fertilizers

Now is the time to discard all fish food, if you have been feeding fish. It loses nutrients over time, so throw it away and buy new in the spring.

Buy all the pond things now that you might need this winter because no stores stock pond supplies in the winter.

Be sure you have enough dechlor, Microbe-Lift and any fish meds you may need.

If you do these few simple tasks, your pond will come alive happy and healthy next spring.

Friday, October 03, 2008

Winter pond care - plants and fish

Winter pond care requires some special care, not much, but just a few things to watch. If you have not done all the nasty fall care, you must do it now. Trying to remove debris through the ice is impossible.

Fish care

Your pond changes in the winter. The fish are in torpor, a word for fish hibernation, as soon as the temperature drops to 43 degrees F. Their metabolisms have slowed and they are hanging out where the water is warmest - at the bottom of the pond. They hang out in a tight group to stay warm. They are not eating because they cannot digest food at these temperatures. If you feed them and they do eat the food, the partially digested food will kill them. They can survive if the pond freezes over, but only if you keep a hole open in the ice so gasses can be exchanged. If they have no oxygen, they will die.

If your pond freezes solid, do not leave any fish or living creatures in the pond. They will not survive.

Any plant material or fish waste left in the pond will decompose and cause a build up of toxic gases and your fish will die, as will any frogs, turtles or toads. The aeronomas bacteria produced continues to grow and your pond inhabitants will die. And it will be your fault. And this decomposition quickens in the spring faster than your fish come out of torpor and can become even more dangerous.

Turtle, frog and toad care

Make sure the frogs, turtles and toads have mud to burrow into. Inside the house is better for them, but most of us don't have a spare room to house our turtle, frog and toad population. If you must leave them out and can't get them out of the pond, try this trick. Find a plastic dishpan or plastic box and fill them with sand, dirt and kitty litter. Put the box in the bottom of the pond. They will dig in and hibernate there. When the weather warms in the spring, you can remove the temporary rooms in their fine hotel and pack them away until next winter.

Plant care

Cut all bog plants back. Or remove them from the pond. You did this when you prepped for fall, right? The plants will die all the way back even if they are hardy plants. They will return in the spring bigger and better. If you have tropical bog plants, they need to come in the house with the water lilies. It's getting crowded in the house.

Water lily care

If you have hardy water lilies, drop them to the very bottom of the pond. If your pond freezes solid they have to come in the house too. If you have a greenhouse or something you can turn into a green house, it's better because the water in that pot can get pretty rank before spring arrives and your lilies can go back outdoors.

If you live in a part of the country where the pond would never freeze solid, you are fine leaving them in the deepest part of the pond. Water lilies thrive at 10,000 feet in Rocky Mountain National Park lakes.

If you have tropical water lilies, you must bring them inside where temps do not drop below 50 degrees. If you have a greenhouse, all the better because your house is now full of plants sitting in water. If you live in the south, as I do, you can put your tropical lilies in the deepest part of the pond and they have at least a 50-50 chance of survival

You may also remove the lilies from their pot, rinse them well and store the tubers in a sack of damp sand, again do not put them where temperatures drop below 50 degrees F. Remove them in the spring and repot. Be sure the tubers are firm. If they are mushy, throw them away. You will have plenty, don't worry. In the spring you will be able to pot up plenty of lilies to give to friends.

Thursday, October 02, 2008

How to build a pondless Waterfall


Pondless waterfalls have become all the rage in the past few years. They have all the good parts of a water garden, but none of the green water or sick fish worries of a pond. For those people who want water sounds in their garden, a pondless waterfall may be a great way to have it. They are easy to build if you wish to do it yourself.

What is a pondless waterfall

A pondless waterfall consists of a lined hole in the ground filled with rocks, a rock or rocks made into a waterfall and a pump that recirculates the water. That's all you need. I prefer to add some plants around it so it does not look like a rock pile. Plants soften any pond or pondless waterfall and make it look natural instead of made by human hands. Depending on your climate, you can use any plants that grow where you live. They need not be water plants, because they will not be in any water.

You can buy a pondless waterfall kit containing a pump, some tubing and a plastic tub if you wish. They are available most everywhere. I find the kits too expensive and prefer to buy each item individually.

How do I build a pondless waterfall?

Start with a tub that you will bury in the ground. You can buy the tub at a big box store, but their tubs are plastic and don't hold up very long. The sun destroys them within a few years. And they have a built in shelf for plants, so you have to dig your hole to fit those shelves and that digging and positioning will give you gray hair. Those tubs are made for ponds, not pondless waterfalls. So here's what I buy. Go to your local feed or pet store. They will have horse watering troughs, usually made by Rubbermaid. They are cheap, normally under $40.00, and are indestructible. There are no shelves to worry about either.

Dig a hole, put the tub in the hole and back fill with the soil you dug out. If that is unsuitable, use kiddy play sand. Get the tub as level as you can, but leave it elevated about four inches. Fill it with water now. I know it will get filthy, but do it anyway. You will pump it out later. Now, use the hose to wet the sand you used to backfill. That makes it settle into all the air pockets and makes your tub stable. If you don't have it filled with water, the tub will float up while you are hosing the sand into place and you will have to start digging all over again.

Now that you have the tub in place, it's time to put your pump in. I usually put the pump somewhere where I know I can get to it later, because it will need cleaning periodically. Connect a long piece of flexible tubing to the pump and lay it outside the tub. This tube is what water will go through to get up and over the waterfall or through the rocks, so be sure the tubing is long enough.

Next, place big rocks, any kind you like, in the tub. Put big ones on the bottom. Remember, you will have to get to the pump to clean it at least twice a year or so, so either cover the pump so you can remove it easily or put it in an 8" - 10" wide piece of PVC with the cord sticking out. Don't let the PVC stick up over the top of the tub. Cover it with a flat rock.

Put topsoil around that 4" of tub that you left sticking up. You will plant in that later. On the top of the topsoil, cantilever flat rocks over the top of the tub so no rubber is showing.

Now you are ready to either build a waterfall using flat rocks or, my favorite, use a rock with a hole drilled through it. Push the tubing through the hole and let it bubble up and back down into the tub. You may have to have the hole drilled through the rock at the rock yard if you do not have the equipment to do it yourself.

Thread the tube through. Plug in the pump. Plant some pretty plants around your new piece of art and mulch it up.


You have a pondless waterfall.

Wednesday, September 24, 2008

Pond Gadgets

Now that you have a pond, you need a pond shelf in your garage, or a pond place in your outdoor shed to store your pond gadgets. We accumulate pond gadgets that we find we cannot be without. For those of you just starting, this is a beginning list of pond gadgets to have around the house because you will need them and you will need them when stores are closed.



HIP BOOTS for getting in the pond to fertilize water lilies or to trim plants. If the pond is deeper than hip boots are tall, you either need a BOAT because you have a lake or a BUCKET AND A ROPE because you have a well.

Of course, you can go in the pond barefoot unless you think there may be critters in there you would rather not encounter without foot and leg protection.

AQUA GLOVES You can fertilize lilies or cut back plants with clippers in your bare hands or you can use aqua gloves, a glove with long plastic sleeves, if you are afraid of pond critters and there certainly is no reason to be unless you live where poisonous water snakes also live.

HAND POND PRUNERS These are made with ultra long handles so you can clip plants while standing next to your pond, but if you have your HIP BOOTS on and are already in the pond, you can use regular clippers. Your bare hands will work pretty good here too.

POWER NOZZLE What on earth is a power nozzle? It will become your most valuable pond accessory and here's how to make one: Get a hose cut off valve and a separate nozzle with a small hole at the end. It fits on the cut off valve. Get both at your local hardware or big box store. Screw the pieces together and to your hose. You now can spray a stronger stream of water than you can with any one piece nozzle. Buy several of these because everyone will like it, borrow it and you will never see it again. Use the nozzle to get dirt and algae off the waterfall, the rocks and to clean the filter. Do not wring out filter material as it breaks down, gets smaller and smaller and soon you will have to buy new.

TWO SCREWDRIVERS One Phillips head and one flat head because the makers of screw driver bits have visited a plague upon us and make two different kinds of common bits, so we never know which one we need until we see what needs to be done and we always have the wrong one in our pocket. Buy and carry them both for pond chores like removing hose clamps and using your POWER NOZZLE to blow dirt out of your tubing and pump.

NET You need a net to scoop debris from the bottom of the pond. I normally do this from outside the pond so I don't need the hip boots. If you need to catch a fish, the net comes in handy as well.

DECHLORINATOR Please, please keep a bottle of dechlor on hand. If you never need it, that's wonderful, but here's why you need to have it on hand. You turn the water on to top off your pond. It's going to take a bit of time, so, you decide to fold the laundry while you are waiting. The phone rings. You chat with your friend for a few minutes. Then you remember you have to get some bill payments in the mail, so you hop in the car to drop them off at the post office. While you are out, you decide to pick up a few things at the grocery store and pick up the dry cleaning. In the cleaners, you talk with the clerk about the weather for a few minutes, get back in your car and see the car needs gas, so you stop to fill up the tank. You get home and for the life of you, you can't figure out why the driveway is flooded.

Suddenly it dawns on you. You rush to turn off the water and see your fish lying at the bottom of the pond not moving. If you have dechlor in the house, you can probably save those fish. Whew, aren't you glad you have some?

EXTRA PUMP, TUBING, HOSE CLAMPS Because they always break when no store is open and you need to do repairs immediately before tonight's dinner party.

AQUATIC PLANT FERTILIZER If you don't have fertilizer made for water lilies, you can use Job's Tomato Spikes, if you can't find those, you can use Job's Tree Spikes, if you use the tree spikes, then you will need a HAMMER because you must break those babies into 4 parts and only use one per gallon pot and you can't break them with your bare hands

MICROBE-LIFT PL I have found this to be the best thing to eliminate blanketweed or string algae and to keep your ecosystem balanced and water clear.

BEER I don't know who tried it first, but it often works to clear up blanketweed or string algae. Just pour it in the water. Or if it's really hot outside, drink it.

With these materials nearby, you will be able to do the necessary pond maintenance, do quick and easy repairs without running to the store first.

Friday, September 19, 2008

Pond Pumps and Filters

Early pond building

When I built my own pond in my back yard in 1987, filters and skimmers were used on swimming pools, not ponds. Flexible rubber liner ponds had not yet been heard of. I used a PVC liner that was meant to be used as a liner in sanitary land fills. A pond pump was bright blue and normally used as a sump pump in leaky basements. Shortly after I started building ponds commercially, a few companies started building pumps especially for ponds, made them black and different sizes. We connected the pump to a garden hose to run water over a waterfall. If we wanted two streams of water over the falls, we used a hose divider to get those two streams. The largest pond pump was 1200 gallons per hour.

The pond market grows

Within a couple of years, companies realized that backyard ponds was the niche market of the future and started making products strictly for ponds. We had bigger pumps, special hoses, special dividers and now needed hose clamps. Our liner choice was still laminated PVC.

But the market grew and as it did, opportunists arrived. Until skimmers and filters were marketed, no one needed them. Koi pond enthusiasts were already using elaborate swimming pool filters. I was known to remark that the filtration system of a koi pond I was working on looked a bit like a heart - lung machine. If you wanted a pond with goldfish and plants, you did not need a filter, nor a skimmer. You still don't.

The new pond companies that were proliferating throughout the country began to convince pond installers and do it yourselfers that filtration was a necessity and no pond would work unless it had a skimmer.

Filters and skimmers arrive on the market

Pond filters and skimmers are relative newcomers to the pond building industry.

A pond skimmer is a black plastic box that attaches to the side of a pond with bolts and nuts through the now rubber flexible liner. The pump sits inside and draws pond water through the skimmer into a basket inside and removes surface debris before sending the water on over the waterfall. You clean the basket periodically.

If you build your pond under a tree, you might need a skimmer. Unfortunately leaves that fall from a tree don't stay on the surface very long and that skimmer cannot get leaves or other debris off the bottom of your pond. So there is your skimmer with the nuts and bolts and seal that have penetrated your liner. If the seal fails, and it frequently does, it can cause huge and possibly unrepairable problems.

A pond filter removes organic debris from your water, cleans it and returns it to your water. And it does a remarkably good job at that. If you feed your goldfish, you probably need a filter of some sort. I like the under $10.00 homemade ones. They do an excellent job.

Balance your pond

So how does your pond survive with no skimmer or filter? Balance it ecologically, with submerged vegetation and floating plants that cover at least 50-70% of the surface area. Do not overload your pond with fish and most importantly do not feed them! Those fish live off the submerged vegetation, usually anacharis, and the fish waste fertilizes it. Anacharis grows faster than the fish can eat it.

You don't need a pond filter or a pond skimmer. More money can be in your pocket to spend on better things than pond filters or skimmers.

Marketing works, but nature works better.


Wednesday, September 17, 2008

Choosing a Backyard Pond Pump

So many backyard pond pumps to choose from: Which one is best for me?

Backyard Pond pumps do one thing: They move the water in your pond from where it is to somewhere else. Most of the time they pump it up and over a waterfall. Other times they pump water through a spitter, an ornament in or next to your pond, often a frog, dolphin, fish or piece of statuary. Sometimes they pump water up in the air like you see in huge commercial ponds near the mall or on the farm.

There are things you must know before choosing the right pump for your pond. Half of your pond water has to move through your pump every hour. So if your pond is 1000 gallons, your pump has to pump 500 gallons per hour or GPH. As this is a bare minimum requirement, you would be best to consider a larger pump. For example, if you are moving water over a wide or tall waterfall, you need more GPH. If you are pulling water through a filter, you must be sure you are pulling enough to make the filter work properly. So figure on buying a larger pump than the minimum size, so you have some wiggle room.

So now you have water moving around in your pond. It sure looks nice and sounds great going over that waterfall, but moving does more then just look nice. If you have fish in your pond and feed them, the pond will be out of balance ecologically. Feeding fish makes them grow too big for the available oxygen, so your water needs to have oxygen introduced. Your pump does that. If the pond water surface is moving oxygen is being absorbed by the pond water and then your fish can breathe easily.

If you do have fish, and most pond owners do, you probably have a filtration system. The pump also pulls water through that filter system, either mechanical or biological. That filter pulls suspended debris out of the water. Usually the debris is algae and when you get too much algae, your water will turn green. The proper filter can keep that from happening. So the pump must be big enough to meet the needs of your filter.

You have three choices of pump types: Submersible, external and solar. Submersible pumps cost less, but do not last as long. They are still the pump of choice with most pond owners. Because they are made of a resin material, they can be used underwater, but if the seal is broken, the pump must be thrown away. It cannot be fixed and returned to the pond safely. A submersible pump can easily last 5+ years if cleaned regularly. Cleaning is important to a pump's life. They often sit on the bottom of the pond and suck in all the rotted organic debris sitting in the bottom of your pond. If left uncleaned for any length of time, the pump impeller, a reverse propeller that sucks water in, can become damaged quickly.

In general, the more expensive the pump, the longer it lasts. Always check the warranty length of any pump.

External pumps last longer, pump more water, can be repaired and are more expensive. They also need to be hidden somehow. No one likes to look at a pump and filter set up right next to their waterfall. But if you have a large pond, you might be better served by a external pump. They are certainly more efficient than submersible ones, they cost less to operate and can pump more water. Because they are stronger, they can work with most biofilters and last longer because they do not have to work as hard. If I were to get an external pump, I would look for one that pumped as many gallons per hour as my pond held. If I had a 5000 gallon pond, I would want a 5000 gph external pump.

Solar pumps are starting to come into their own. We still have a long ways to go before they will perform as well as we want them to, but the technology is coming along. The biggest drawback of solar pumps is they will not pump if the sun is not shining, so your pump will be off during gray days and at night. As solar energy storage technology becomes more widely available, solar pumps will become the best buy.