Showing posts with label hot tub pump in pond. Show all posts
Showing posts with label hot tub pump in pond. Show all posts

Saturday, June 02, 2012

Pond Pump Question


Until I get my birdbath wired on Monday, see this latest pump question answered by the pondlady

Pump question:


My tub pump not working (sucking) for pond?
I am using a pump from a jet tub for my pond. I put the intake directly into the water it works normally, I use one stick of PVC with all required fittings and glued properly and the pump will run but not suck.

I can't figure out why the pump will not suck with a 3' stick of PVC attached.

I have primed the pump, done everything I could think of.

Any suggestions?


Pondlady sez:



There are a couple of things that might be going on. First of all, is the pump running? You can usually tell by a slight hum when you touch it. It could have tripped the GFCI, so the outlet needs to be reset. Try that. Or the impeller could be gummed up with something. Check the intake end of the pump. Use screwdriver to move the impeller to loosen it. Of course, you have the electricity off when you do this.

Or the pump does not have enough head to push the water 3 feet up in the air. That is probably the reason if the pump is working normally otherwise.


You can see the answers to dozens of pond question in my book, "A Practical Guide to Building and Maintaining your Pond" available

Or join us at  pondlady.com to get your questions answered or share your pond experiences.